Showing posts with label kayak. Show all posts
Showing posts with label kayak. Show all posts

8/29/2011

BERKLEY CLASSICS QUICK SET ROD HOLDER QSRH 1056140 Review

BERKLEY CLASSICS QUICK SET ROD HOLDER QSRH 1056140
Average Reviews:

(More customer reviews)
Item works as designed. It is a great product and I would purchase again in a heartbeat.

Click Here to see more reviews about: BERKLEY CLASSICS QUICK SET ROD HOLDER QSRH 1056140

BERKLEYCLASSICS QUICK SET ROD HOLDER PEDASTAL, RAIL, SIDE, OR FLUSH MOUNTSYSTEM QSRH 1056140
Fully adjustable rod holdersthat can be mounted securely to a pedastal, rail,side or flush to the gunnel of a boat.Double locking leverssecurely hold rod and reel in place.Downward pressure cannotdislodge the rod and reel.Tough, corrosion proof,durable polypropylene construction. Mounting bracket mounts securelyand securely holds all types of rods.Great for many fishingapplications...even kayaks and canoes!


Buy Now

Click here for more information about BERKLEY CLASSICS QUICK SET ROD HOLDER QSRH 1056140

8/03/2011

Cannon Dual Rod Holder - Rear Mount Review

Cannon Dual Rod Holder - Rear Mount
Average Reviews:

(More customer reviews)
This order was sent in a timely manner and it was half the cost of the same item at a sporting goods store.

Click Here to see more reviews about: Cannon Dual Rod Holder - Rear Mount

For fishing two rods off the same downrigger, these two independently adjustable rod holders fit into standard Cannon tube clamp.

Buy NowGet 8% OFF

Click here for more information about Cannon Dual Rod Holder - Rear Mount

7/22/2011

Scotty Powerlock Black Rod Holder with 244 Flush Deck Mount Review

Scotty Powerlock Black Rod Holder with 244 Flush Deck Mount
Average Reviews:

(More customer reviews)
Scotty Powerlock Black Rod Holder with 244 Flush Deck Mount. I ordered several to use rigging Kayaks. For flush mounting to deck with out having to drill a big hole thru the deck. Requires Four holes for screws which are not Provided.

Click Here to see more reviews about: Scotty Powerlock Black Rod Holder with 244 Flush Deck Mount

Power LockScotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability.No. 231Power Lock Rod Holder with No. 244 Flush Deck Mount

Buy NowGet 20% OFF

Click here for more information about Scotty Powerlock Black Rod Holder with 244 Flush Deck Mount

6/19/2011

Scotty Powerlock Black Rod Holder with 241 Side Deck Mount Review

Scotty Powerlock Black Rod Holder with 241 Side Deck Mount
Average Reviews:

(More customer reviews)
They are strong and durable. I had another pair of them before I bought these. You can remove them for security when not using your boat. They were kind of difficult to install in my alluminum boat because I had to reinforce the side and space it towards the inside. I used artificial decking material. Originally I used real decking but it eventually cracked. I would recommend these but you should have a plan as to how you will install them before you buy them. I may eventually buy more bases and install them in additional locations. I like the pole locks on this model. It gives you some added security when fishing.

Click Here to see more reviews about: Scotty Powerlock Black Rod Holder with 241 Side Deck Mount

Power LockScotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability.No. 230Includes No. 241 combination deck or side mount

Buy NowGet 24% OFF

Click here for more information about Scotty Powerlock Black Rod Holder with 241 Side Deck Mount

5/21/2011

Scotty Baitcaster/ Spinning Rod Holder Black with 244 Flush Deck Mount Review

Scotty Baitcaster/ Spinning Rod Holder Black with 244 Flush Deck Mount
Average Reviews:

(More customer reviews)
This holder works great for me. It holds my fishing rod very securely. I use this holder for fishing from my kayak. I can keep my hands on the paddle and reach the rod quickly and easily with this holder.
This holder has a rubber strap to lock in your rod if you want. I personally don't use that feature much since the holder does a very good job of securing the rod with gravity alone. Also, by not using the strap, I can take the rod out quickly if a fish hits the line.
I looked at other holders, and while some were less expensive, they all seemed inferior to this one.
I got a different base (the #241 Mount, see link at bottom of this review) later to avoid the obvious large hole I would have to drill (not just for the screws but the shaft also).
The left-right rotating neck feature is nice to position the holder just how you want it. I don't change it much once I get it set, but it's invaluable to get it into the right initial position. It stays put by friction alone, but it is very secure.
The twist for up-down, locks very securely with a thumb wheel. Again, I don't change it much once I get it set, but it's invaluable.
Regarding my setup, I didn't want to drill holes in my kayak, so I rigged up a system. I loaded a picture of my system to the "customer images". It's the yellow kayak. This system is basically the holder mounted to a board and then bungee strapped to my kayak. The bungee straps were the default straps already on my kayak. The board I chose was a "plastic" board for outdoor decking applications sold at my local home store. It was strong and waterproof.
While this setup enables flexibility of positioning and no holes, it is slightly less solid than drilling into the 'yak. If you're catching huge lunkers that strike super hard maybe this bungee setup won't work for you. I have caught some pretty big fish that have hit hard though, so maybe getting carried away isn't needed. For me this bungee setup worked well because I was fishing casually and I could move or eliminate it entirely. For example, a day without fishing or when the kayak is on the car racks.
I would definitely buy this holder again, it has worked really well for me.
Amazon's "241 Mount" link:
Scotty Side Deck Mounting Bracket Black


Click Here to see more reviews about: Scotty Baitcaster/ Spinning Rod Holder Black with 244 Flush Deck Mount

Holds a bait caster reel in a cushioned cradle. A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top. No. 244 Flush Deck Mount included.

Buy NowGet 22% OFF

Click here for more information about Scotty Baitcaster/ Spinning Rod Holder Black with 244 Flush Deck Mount

4/14/2011

Seattle Sports Deck Mount Rod Holder Review

Seattle Sports Deck Mount Rod Holder
Average Reviews:

(More customer reviews)
This rod hold is perfect for kayaks. The edge of the rod tube is rounded over with no sharp edges, a big improvement over some other brands (West Mar, Acad, etc.) The installation was easy but you need to be careful cutting, if using power tools. I used a knife on a scroll saw and had no problems. Since the rod tube is angled, I used a rasp to bevel the underside of the hole so that the flange would lie flat on the surface of the kayak. I recommend cutting the main hole and then marking the holes for the screws using the rod holder as a guide instead of the paper template. I used stainless steel machine screws with nuts and lock washers to secure the rod holder to the deck. My son noted that the rod holder looked as though it came on the kayak from the factory - we have Old Town Vapor kayaks and they have flat spots behind the cockpit for installing this type of rod holder.

Click Here to see more reviews about: Seattle Sports Deck Mount Rod Holder

Mount this easy-to-install rod holder on any kayak deck to add a convenient pole holder. Features an angled design and a clean, natural surface-mounted look.

Buy Now

Click here for more information about Seattle Sports Deck Mount Rod Holder